Freestanding Baths: How Exactly To Get The Best Fit

freestanding-bath-1After checking through all the tub layouts that were accessible, you eventually settled on freestanding baths. Now, the following challenge is finding one that’s the best match. These helpful suggestions will guide you in picking the one that is correct.

A.) Is It Possible To Customize It?

At times you might want to alter the type of fittings which you initially used with your bath. You might want to contain overflows or jets for hot tub applications. Aspects that are such would require a bath designs that can adapt them; therefore you should consider whether your tub design can allow for such customization in future.

B.) Size Matters

Although most people would be comfortably fit by the normal bathtub, you should verify this first. According BUILD, the rule of thumb when selecting proper bath sizes is checking for a size that fits the largest person among those who’ll put it to use to. Nevertheless, you may not always select a bath that is longer. Greater depth can readily compensate for any deficiency in length.

Most probably, you will find a standard tub measuring 1.5m by 0.75m in Australia. Therefore, if you’re 6-feet tall, you’ll find this type of bath quite uneasy, especially since the dimensions are including the thick rims of the tub at each conclusion. The only way you can be really confident a particular alternative is the best fit is by just sitting inside it.

Of course, you might also want a tub where to share a romantic bath with your partner. In this case, wider designs are the best suit. It’s also possible to need to check it out before making a decision.

It may truly not easily fit into your bath, no matter how much you want a large bath. Possibly, you might be able to take unneeded fixtures out within the bath to make room for your own bathtub. Why maybe not if you already have an adjoining powder room, even convert your family toilet into a shower room? Fortunately, as mentioned earlier, you can nevertheless opt for fuller tubs to compensate any inefficiencies in length.

C.) Water Use

According to BUILD, you would need to use hot-water that is 65% just to have a warm bath in your bathtub. Therefore, you must check whether your hot water system can completely cater to this water capacity, depending in your bathtub size. Don’t forget to consider how many individuals in your home who’ll be using the tub, apart from adding up the total capacity of appliances using heated water at home.

D.) Appropriate Installation

The weight of stone baths may range between 1,200 to 3,500 lbs. Once filled with water, this weight raises dramatically to between 2,000 and 4,500 lbs. Due to such a significant weight, you should be completely certain that the supporting base is a level, continuous and non-deflecting area that can support such a tub.

Its depth should be a key consideration, if you intend to install the bathtub flush with the earth. This will determine how much building work would be required during the install process. Most of all, your selection must be compatible with whatever plumbing system you’ve got.